Maximum reliability and simplicity in use;

High volume production of articles, even of different sizes with similar working cycles;

Sturdy construction a minimum maintenance;

It can be equipped on request with 3 or 4 arms that change station simultaneously, so alternating in the different phases;

Many cycle customising possibilities (double loading/unloading station, pre-cooling etc.).

PRODUCT SPECIFICATION

Standard features:

• Internally lighted and sufficiently sized main control board;
• Direct rotation movements guided by sturdy gears, powered by A.C. motors controlled by inverters with ramp regulators in acceleration/deceleration of the rotation speeds;
• Interchangeable arms in one block equipped with an air or inert gas injection system;
• Rapid balancing system for each arm with visual control;
• Thanks to a high-efficiency ventilation system combined with excellent thermal insulation in high non-conductive material, considerable energy saving is achieved;
• Cooling chamber with internal parts in stainless steel equipped with high-efficiency fans functioning with blown air or blown air/atomized water;
• Oven door in modular, thermally pre-formed panels;
• Electronic safety barrier obtained by means of photoelectric cells;
• Visual and acoustic alarm circuit;
• Satellite console to facilitate operator functions.

OPTIONAL

• Air humidifier;
• Supervision system PC/PLC “TOTAL CONTROL SYSTEM”;
• Water recycling pump;
• Inverter for regulating door opening/closing speed;
• Rapid clutches for arms balance;
• Zero position search;
• Cooling station with semicircular sliding doors in stainless steel;
• Arms with supplementary airways;
• Software for moulds electronic balance;
• Mobile and fixed work platforms.